Assembly is easy and cleanup is easy (put a slice of bread through after the meat to make it even easier, or grind up an onion if you're making meatloaf anyway). The knife and both plates store inside the screw cap, so I don't worry about losing them (though KitchenAid sells replacements, as does goodmans-dot-net). The grinder even comes with a handy wrench-thingy to help take it apart if it tightens up.

The knife and plates are not stainless (which wouldn't hold an edge), so you do have to dry them off right after washing, but I put everything, including the wooden stomper, right in the dishwasher, and after more than a year nothing has had a problem.

[...] - this isn't an industrial tool! You can't set the mixer speed above three or four when grinding (less if the meat is gristly), and you've got to cut up the meat small enough to fit in the feed tube (the instructions say one-inch cubes, but long strips work too). Treat this right and it will return the favor.

About the only thing that would make this more perfect is a cylindrical brush to clean out the horizontal and vertical shafts, since the dishwasher spray can't really completely reach both, and the horizontal shaft has a screw thread that tends to catch crud (Right now I'm using a folded sponge, and the abovementioned bread slice).

404 of 416 found the following review helpful:

the attachment workhorse  Oct 16, 2000
By Gaylin Walli
I've used this attachment more times than I ever thought I would. I've used it to prepare food items for my family as well as food items for crowds as large as 200 and regardless of what it is I've been making, this attachment has rolled through it without complaint. In combination with other pieces such as the sausage stuffer or the fruit attachments, you may well find that this single attachment stays on your machine the longest.

I am absoultely stunned at how easy it is to put together and how simple it is to get wonderfully ground items out of it. I've had no trouble grinding any cut of meat (marbled or lean), type of meat (venison, beef, pork, chicken), or state of meat (cooked or raw). Things like chickpeas also get ground just the way I like them. The two, differently sized grinding plates give you just what you need in texture. My biggest pleasure in using this attachment is during hunting season when my husband brings home more than one deer. Venison burger meat and sausage processing never went faster. No more late nights with a hand-crank grinder!

When you're done, there's nothing simpler in the cleanup. Nothing seems to stick to the plastic (plus, it's dishwasher safe!) and the metal pieces wash up quickly by hand. Even the little wooden stomper cleans well (and I've felt lost without it when I couldn't find it during sausage making). I think this attachment is the easiest to use of all of the ones I've tried.

I'll never regret the purchase of this attachment.

467 of 486 found the following review helpful:

It gets the job done, but it's nothing special.  May 29, 2007
By D. E. Hardy "DreamScriber"
I work in the food industry, so I'm unfortunately comparing this to its commercial counterparts. If you have small batches of meat to be ground at a time, this grinder is so much better than the crank grinders and gets the job done in a quarter of the time. I still use it, but here's what I don't like about it:

The blade is junk. It doesn't cut the meat at all, and is more prone than ever to getting silver skin and grizzle wrapped around it, forcing you to stop and clean it regularly throughout the proccess. More so than most other grinders.

Stomper: They call this a stomper? Are you serious??? I have the new model that does not come with a wooden stomper, but instead has a plastic contraption that acts both as a wrench and a stomper. It's not solid in design, and is quite smaller than the hole so it tends to pull more meat up when you pull it out than it pushes down to begin with.

Since there is no gasket that comes with this and everything is plastic, the seals aren't real tight, and meat tends to squirt out around the plate quite often. This isn't a real big deal unless you're looking for a specific texture, as for sausage.

Horrible grind. Based on all the other faults with this machine, you'll never reach that beautiful solid grind that you see with commercially ground meat. It's more of a squishy mess, even with the large dye plate.

Good luck stuffing sausage. I spent thirty minutes fighting this machine to get ground meat into the casing with very little luck. I managed one link in that amount of time, gave up, and immediately ordered a Grizzly sausage stuffer (which is absolutely amazing, but that's another review).

I am very happy with the ease of clean up. One of those bristle wands that you use for scrubbing cups works great for getting in the grooves of the attachment as well as in the holes of the grinder plate. Just don't forget to hand dry the metal parts immediately or you'll have rust everywhere. I store all my parts in a zip lock back with some rice to keep them together and dry.

So if you just need something small to make a quick batch of burgers or meatloaf with very little effort, this is a great deal. But if you are trying to make large amounts of sausage of the same quality that you would find in a meat market, you may want to keep looking.

110 of 112 found the following review helpful:

Great attachment, Most often used out of them all  Mar 13, 2003
By Bob Feeser "MillCrafters.com"
I bought this attachment at the same time I bought two or three other attachments, and this is the one I use all of the time. I found that grinding meats to be very useful. I have a mother who is 88 and she prefers everything tender and juicy. So unless it is cooked until it is super tender, she doesn't eat it. With the Kitchen Aid FGA that is all solved. For example I buy chicken in large quantities when it is on sale, and grind it up. Adding shredded rye bread, some Italian seasoned bread crumbs , rosemary, and oregano in the mix, and I make a hamburger(chicken)-meat loaf, or meat balls that are tender. Without the food grinder, I would have to buy preground meat.
Their are those who find that the best way to buy chicken is whole, that way you can inspect the whole bird. By buying parts, they are able to cut out the unsightlies, and sell the parts. With preground meat that is even more of a concern. With the Food Grinder attachment, you have the option of handling that item whichever way you may choose.
Clean up is a snap. It almost falls apart, disassembly is that easy. Cleans up easily with some soap and warm water, or by putting it into the dishwasher. The cutting blades are handwashed. They appear to be high strength steel, and I am concerned about them getting lost in the wash, and degrading the finish. They clean up in only a minute. The rest of it goes into the dishwasher.
Even though the FGA is made out of plastic on the outside, the internal components are metal. It is very durable, and works without a snag. No jams, no problems. It attaches easily to the front of your Kitchen Aid stand mixer, and sits very securely. I expect it will last for a very long period of time.

78 of 80 found the following review helpful:

A Cleaning Tip For Your Grinder  Jun 22, 2004
By D. Hammork "Mom of 3"
Hi,
I love my grinder and have not any problems with it. After I slice the meat into strips, I partially freeze the meat before grinding it. When I have finished grinding, I take a piece of bread and grind it to push the rest of the meat through the grinder. I then take the grinder apart and rinse it out and soak it for about 5 minutes in a dishpan of hot soapy water with about a tablespoon of bleach. Wash and rinse the grinder thoroughly and lay on a terry towel to dry. I hope this helps anyone having trouble cleaning the grinder.
Delores

See all 481 customer reviews on Amazon.com